Tech Notes 06/20/10

Body rules. We have had several problems with bodies and noses. Please check the ABC rule book and make sure your car is ready for inspection.

Fuel Cells. This is our fuel cell rule.

Fuel cells with rubber bladders

Fuel cell plates or fuel cell tubs are mandatory.

Fuel cell protector plate 1/8 thick steel must be mounted on outside of frame rails. The plates must cover the sides and rear of the fuel cell and be official approved. Fuel cell minimum height 11 inches. Fuel cell must be banded both ways with two straps each way. 1-inch minimum steel straps.
Fuel cell tub 1/8 thick steel with one-inch lip. Front, bottom and rear will be one piece. The top of the box will use current 18 or 20 gauge top with 1 inch by 1/8 steel straps with two in each direction
All fuel cell cans must be magnetic steel. All fuel cells must have check balls in place. Racing pump fuel only

Thank You for working with us so well in the first part of the year. We have a very nice group of teams. We try very hard in PRE TECH to help you set up your car and work with you to make sure your car is ready to race. We spend much time at every race to help you. That is what pre-tech is for. It is a tool to help everyone.

4. If you have any problems before or at a race please see Tim or I for any help we can give you. We will try and work as much with you as we can. But we must stay with in our rules package.

We are working on some spec shock packages for Penske Shocks. This is just in
works and would like a team to try these shocks. We are also going to be working with several other shock types to see what we can do to bring costs down on shocks. We are looking for teams to try these shock packages. Please tell Tim or I that you would like to try one of these packages. These would be free to try. For more info call Tim or I. We are working on details for this program.

Thank You All
Mike Lemke and the complete ASAMT Tech Staff.

Mike (Lumpy) Lemke
ASA Midwest Tour Tech Director
www.stockcartech.com